A)Exhaust Dyeing

xg:TECHCEON Dyes/TECHCRON

0.5-1g/L:Disprsing ＆ Levelling Agent

pH4.5-5.0:Buffer Solution

1-2 ℃/min:Heating Rate 130℃, 30-60min

2-4g/L:Hydrosulfite Conc.

xg/L:Surfactant

B)Thermosol

xg:TECHCRON Dyes/TECHCRON

10-15g/L:Antimigration Agent

1.5-2.5g/L:Wetting Agent

pH4.5-5.0:Buffer Solution 40-45℃

40-70%:Pick up

Below 120℃/120℃

180-230℃,30-90sec

2-4g/L:Caustic Soda Solution(38⁰Be)

2-4g/L:Hydrosulfite Conc.

xg/L:Sur-factant

C)Printing

xg:TECHCRON Dyes/THCHCRON

500-600g:Thickener

15g:Fixing Accelerator

2-3g:Citric Acid

yg:Water or Thickener

1000g:Total 100℃,1-2min

HT Steam:168-180 ℃,7-10min Hot Air:195℃,45sec

2-4g/L:Caustic Soda Solution(38⁰Be)

2-4g/L:Hydrosulfite Conc.

xg/L:Sur-factant

Dye inter mediates

Benzanthrone

3-Brmobenzanthrone

3.9-Dibromobenzathrone

1,4,5,8-Tetrachioranthrauinone

1,4-Diaminoanthraquione

Classification

S:High Energy Dye

SE:Medium Energy Dye

E:Low Energy Dye

Suitability

⊙ :Very Suitable

○ :Suitable

△ :Less Suitable

× :Not Suitable

Test Method of Fastness

Light:AATCC16E-1987(xenon Arc,20hr)-Rating:Change of Shade

Dry Heat:AATCC 117-1989-Rating:Staining on PES

Thermomigration:AATCC 61-1993 2A(49 ℃ × 45min) After Heatset (180℃ × 30sec),Wash Fastness-Rating:Staining on Nylon

Wash:AATCC 61-1993 2A(49 ℃ × 45min) -Rating:Staining on Nylon

Perspiration:AATCC 15-1989-Rating:Staining on Nylon

Crocking:AATCC 8-1989-Raging:Staining on Cotton

Gas:AATCC -Rating:Change of Shade